Visual Instruments Flap Position Indicator display gauge, providing a clear, modern readout of flap position for older Cessnas.

Visual Instruments Cessna Flap Position Indicator (Display Only)

Replace your outdated or malfunctioning flap indicator display with this direct replacement for older Cessna aircraft. Designed to provide accurate, reliable flap position readings, it solves the common issues of the original 1950s–60s style gauges.

Direct replacement for older Cessna flap position indicators
Durable, precise, and reliable
Restores full functionality to your flap system

Upgrade your aircraft with a modern, dependable flap display gauge.

Product Code: Visual6000-0900

Qty:

Approved flap indicator models:

Visual Instruments Inc. FAA /PMA

Model Number 6000

Part Number 6000-0090

S.T.C. SA00819SE

Type certificate part is eligible for installation:

Cessna 172F, 172G, 172H, 172I, 172K, 172L, 172M

Cessna 182E, 182F, 182G, 182H, 182J, 182K

Cessna 205, 205A, 210, 210D, 210E, 210F, T210F

Cessna 206, P206, P206A, P206B, TP206A, TP206B

Cessna TU206A, TU206B, U206, U206A, U206B

The Federal Aviation Administration awarded Visual Instruments STC# SA00819SE. This approval allows owners of certain model Cessna aircraft to replace older, troublesome Flap Position Indicators with our modern-style reliable gauge.

Eligibility Tag Rev A

Can I replace only the indicator in my airplane?

No. Our indicator is not compatible with any of the Cessna transmitters.

When Cessna introduced the electric flap system, the first indicators were manufactured by A.C. Spark Plug. Cessna later (around 1965) switched to an indicating system manufactured by Stewart Warner. These two systems were not compatible with each other (see Cessna service letter SE70-12 dated May 28 1970) and Cessna recommended replacing both the transmitter and indicator at the same time.

Current replacement parts are manufactured by a third company named Rochester which are also not compatible with the earlier systems (see Cessna service letter SEB00-9 dated Nov 6 2000). THE COST FOR THESE ANALOG REPLACEMENT PARTS RUNS APROX $1,800.00 FROM CESSNAS AND THE WAIT TIME USUALLY RUNS ANYWHERE FROM 12 WEEKS TO 6 MONTHS.

Are any airframe modifications required to install this system?

No, just remove the old Transmitter and Indicator and replace with the Visual Instruments Transmitter and Display.

Will I need any other parts to complete the system?

Our Flap Indicator Kit includes all parts required for installation: the transmitter, display assembly, hardware kit and instructions and STC paperwork.

SEARCH

SEARCH

Visual Instruments Cessna Flap Position Indicator (Display Only)

Technical Specs

Information

Reviews

QUESTIONS?

SEARCH

SEARCH

Visual Instruments Cessna Flap Position Indicator (Display Only)

Technical Specs

Information

Reviews

Join our newsletter today!

QUESTIONS?