Engine preheating is accomplished through electrical resistance heat in the form of thin pads sized and shaped to fit various parts. The pads are surface mounted with a bonding adhesive. This includes engine accessory and reduction gearboxes, fluids, and attached accessories. Power is routed to the heat elements through a dedicated wiring assembly with power indication and circuit overload protection. System is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours.

This preheat kit when installed will supply 1155 watts with a 5.0 amp draw at 230 volts.
This preheat kit when installed will supply 1155 watts with a 10.0 amp draw at 115 volts.

* Required Bonding sealant sold separately. Quantity 3, PN: TU02788

Applicable on ATR 72, ATR 42, Fokker 60, Xian MA60, Euromil Mi-38, EADS CASA C-295, Ilyushin Il-114, and others.

For the following engines:

PW127, PW127G, PW127M, PW127F, PW127E, PW124B, PW125B, PW126A,

* AVF0001 form requested for verification of purchase.