Home > Probes, Sensors, Adapters, P-Leads > JPI Probes and Sensors >

JP Instruments EGT Probe (PN M111)
JP Instruments EGT Probe
JP Instruments EGT Probe


 

Keep the distance from the cylinder head the same for each probe. 2 to 4 inches is recommended. Closer will shorten the life of the probes. Farther (up to 5 3/4 inches) is okay. Uniform spacing is important. Temperature differences of 100° per inch can be expected.

Included with the probe:

  • 1 Thermocouple type K probe
  • 1 Stainless steel clamp thimble
  • 1 Stainless steel exhaust seal washer
  • 1 Stainless screw type clamp
  • 2 Ring terminals
  • 2 Screws and nuts 6-32 X 1/4"
  • 1 Fiberglass tube 1/2" X 4
Sale Price: $115.00


Product Code: JPI-EGT-PROBE
Qty:

Features Technical Specs Information
 
Features


Share your knowledge of this product. Be the first to write a review »