Home > Engine Monitors > JPI Aircraft Engine Monitors > Single Engine Mgmt Systems >

JP Instruments EDM 930 Primary Replacement***Instant Rebate Applied***
JP Instruments EDM 930 Primary Replacement
JP Instruments EDM 930 Primary Replacement


 
Alternative Views:


***$500 Instant Rebate Applied***

Our flagship EDM-930 has been redesigned to fit more ways in your panel! It can be mounted directly into a standard 3.1″ hole or flush mounted. Our Primary system allows you to remove your old steam gauge engine instruments and move up to the most advanced and accurate piston engine-monitoring instrument on the market. The EDM930 also features a long list of user options. EDM-930 as your personal flight engineer. Always there, working in the background, constantly watching over your engine while you concentrate on flying the aircraft. Your EDM-930 will be monitoring your engine conditions four times per second and will warn you instantly if any measurement exceeds the programmed limit.

Leaning is accomplished quickly and automatically using the LeanFind™ procedure. With the EDM it is now possible to have substantially more diagnostic information available to you in a timely and usable manner.

The EDM-930 collects data and displays it for you in a useful way. You can use the EDM-930 to monitor engine temperatures and voltages, adjust the fuel/air mixture, and diagnose engine malfunctions.


Please fill out the
EDM 930 Worksheet and email to [email protected].
See Below for Additional Options




Product Code: JPI-EDM-930

Models

EDM-930-4 Cyl No Tank System [$6,275.00]
EDM-930-4 Cyl (2) Tank System [$6,505.00]
EDM-930-4 Cyl (4) Tank System [$6,739.00]
EDM-930-6 Cyl No Tank System [$6,600.00]
EDM-930-6 Cyl (2) Tank System [$6,850.00]
EDM-930-6 Cyl (4) Tank System [$7,062.00]
EDM-930-7 Cyl [$6,900.00]
EDM-930-8 Cyl [$7,033.00]
EDM-930-9 Cyl [$7,590.00]
Special Instructions


Aircraft Registration Number


CHT Adapter Probe

CHT M113-3/8 probe adapter for aircraft with existing CHT probe [$115.00]
Add 8130 Certificate (JPI)

Add Export Certificate to order, please specify for what location in special instructions [$125.00]
Engine Type and Serial Number


Additional Fuel Pressure

Fuel Pressure, Non-Turbo [$325.00]
Fuel Pressure, Turbo [$550.00]
Experimental discount

[Subtract -$1,000.00]
Two additional tanks

[$656.00]
Additional AMP-2 or Volts-2

[$195.00]
Additional CDT

[$195.00]
Additional CRB

[$195.00]
Additional IAT

[$195.00]
Additional TIT

[$195.00]
Engine RPM Sensor

Slick Mag (included)
Slick Mag Pressurized (included)
Bendix Mag (included)
Bendix Mag Pressurized (included)
Bendix Dual Mag (both on same side) (included)
Accessories

Optional clamp for mounting in 3 1/8" hole [$49.00]

Qty:  
Features Technical Specs Information
 
EDM 930

Share your knowledge of this product. Be the first to write a review »