Home > Engine Parts > Engine Preheaters > Rotorwing PreHeat > Pratt & Whitney Engines >

Tanis Heli-Preheat System - Pratt & Whitney (AW 109)
Tanis Heli-Preheat System - Pratt & Whitney (AW 109)
Tanis Heli-Preheat System - Pratt & Whitney (AW 109)
 
Alternative Views:
Heli-Preheat System – Leonardo-Finmeccanica (AgustaWestland), A109E, A109S, AW109SP with Pratt & Whitney PW206C/PW207C (twin)

FAA-STC: # SR04195CH

Preheat is applied through electrical resistance heat in the form of thin pads sized and shaped to fit various parts. This includes engine reduction gearboxes, attached accessories, main & tail rotor gearboxes, battery (standard configs), and oil/hydraulic tanks. Avionics are heated by a fan driven heater. Power is routed to elements through dedicated wiring assembly with circuit overload protection. System is self-regulating. Heated components reach an average state of thermal equilibrium in approximately six hours.

This preheat kit when installed will supply 999.0 watts with a 8.7 amp draw at 115 volts.
This preheat kit when installed will supply 999.0 watts with a 4.3 amp draw at 230 volts.
(Avionics heat not included in total)

* DC730 bonding sealant sourced separately (5 ounces approximately).

* AVF0001 form requested for verification of purchase.
Sale Price: $13,596.00


Product Code: TANIS-R-TA3134

Models

Heli-Preheat System - Pratt & Whitney (AW 109), 115V (TA3134-1)
Heli-Preheat System - Pratt & Whitney (AW 109), 230V (TA3134-2)

Qty:  
Features Information
 

Share your knowledge of this product. Be the first to write a review »