Heli-Preheat System – AIRBUS HELICOPTERS DEUTSCHLAND GmbH MODEL: EC135T1, EC135T2, EC135T2+, EC635T2+, EC135T3.
W/ ARRIUS 2B1 / 2B1A / 2B1A1 / 2B2.
Preheat is supplied through electrical resistance elements in the form of thin pads sized and shaped to fit engine, main and tail rotor gearboxes, oil tanks, Avionics/cabin heat, and Battery heat. Door kit with annunciation is included. Power is routed to the elements through a dedicated wiring assembly with circuit overload protection and power indicator light. System is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours.
This preheat kit when installed will supply 869 watts with a 7.6 amp draw at 115 volts on Plug 1. Plug 2 will supply 1000 watts of AV/cabin heat at approximately 12 amps.
This preheat kit when installed will supply 869 watts with a 3.8 amp draw at 230 volts on Plug 1. Plug 2 will supply 1000 watts of AV/cabin heat at approximately 6 amps.
* Required Bonding sealant sold separately. Quantity 3, PN: TAU02788
* AVF0001 form requested for verification of purchase.
