Tanis Heli-Preheat Kit - Turbomeca (AS350B3)

Heli-Preheat Kit – Airbus (Eurocopter) H125 (AS350B3) with Turbomeca, Arriel 2B(1B) or 2B1 or 2D

Preheat is supplied through electrical resistance elements in the form of thin pads sized and shaped to fit engine, main & tail rotor gearboxes, oil tanks, and battery (based on single RG-350, RG-355 or RG-390 series battery). Power is routed to the elements through a dedicated wiring assembly with circuit overload protection and power indicator light. System is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours.

This preheat kit when installed will supply 642 watts with a 5.6 amp draw at 115 volts.
This preheat kit when installed will supply 642 watts with a 2.8 amp draw at 230 volts.

* Required Bonding sealant sold separately. Quantity 2, PN: TU02788

* AVF0001 form requested for verification of purchase.