Tanis Heli-Preheat Kit - Turbomeca (AS350, B1/B2/BA)

Heli-Preheat Kit – Airbus (Eurocopter) AS350 B or B1 or B2 or BA with Turbomeca, Arriel 1D or 1D1 or 1B.

Preheat is supplied through electrical resistance elements in the form of thin pads sized and shaped to fit engine, main & tail rotor gearboxes, oil tanks, and battery (based on single RG-350, RG-355 or RG-390 series battery). Power is routed to the elements through a dedicated wiring assembly with circuit overload protection and power indicator light. System is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours.

This preheat kit when installed will supply 619 watts with a 5.4 amp draw at 115 volts.
This preheat kit when installed will supply 619 watts with a 2.7 amp draw at 230 volts.

* Required Bonding sealant sold separately. Quantity 2, PN: TU02788

* AVF0001 form requested for verification of purchase.