-
Home >
Tanis Heli-Preheat kit for Rolls Royce (Allison) engines in BO-105 helicopters, providing cold weather engine protection and reliable starts.

Tanis Heli-Preheat Kit - Rolls Royce (Allison) (BO-105)

Tanis Heli-Preheat kit for Rolls Royce (Allison) engines in BO-105 helicopters, providing cold weather engine protection and reliable starts. - Image 1 of 0
Tanis Heli-Preheat kit for Rolls Royce (Allison) engines in BO-105 helicopters, providing cold weather engine protection and reliable starts. - Image 2 of 0
Tanis Heli-Preheat kit for Rolls Royce (Allison) engines in BO-105 helicopters, providing cold weather engine protection and reliable starts. - Image 1 of 0
Tanis Heli-Preheat kit for Rolls Royce (Allison) engines in BO-105 helicopters, providing cold weather engine protection and reliable starts. - Image 2 of 0
Tanis Heli-Preheat kit for Rolls Royce (Allison) engines in BO-105 helicopters, providing cold weather engine protection and reliable starts. - Image 1 of 0
Tanis Heli-Preheat kit for Rolls Royce (Allison) engines in BO-105 helicopters, providing cold weather engine protection and reliable starts. - Image 2 of 0

Tanis Heli-Preheat Kit - Rolls Royce (Allison) (BO-105)

$
Heli-Preheat Kit – BO-105 (BO-105A, BO-105C, BO-105S, BO-105LS A-1, BO-105LS A-3)

Preheat is applied through electrical resistance heat in the form of thin pads sized and shaped to fit various parts. This includes engine reduction gearboxes, attached accessories, main & tail rotor gearboxes, batteries (based on standard RG-390), avionics, cabin, and oil/hydraulic tanks. Power is routed to elements through dedicated wiring assemblies with circuit overload protection. Approved ground power location and mounting is field fabricated. System is self-regulating. Heated components reach an average state of thermal equilibrium in approximately six hours.

This preheat kit when installed will supply heat thru two plugs. It will provide approximately 841-watts at a load of 7.3-amps total at 115 volts.
This preheat kit when installed will supply heat thru two plugs. It will provide approximately 841-watts at a load of 3.7-amps total at 230 volts

* Required Bonding sealant sourced separately. Reference TNDC730, approximately 7 ounces required.

* AVF0001 form requested for verification of purchase.
Choose your options:
Models(required):
Product Code: Tanis-R-TA2146

Reviews

Write a review »
Average Rating:
( 0 )
Empty Cart