Fixed Wing Preheat Kit for a Quest Kodiak 100 with PT6A-34 engine

FAA-STC: # SA04114CH

This preheat kit contains pad heat elements for turbine engine preheat, Battery heat, and an Avionics/Cabin Heater. This multi-point configuration fully preheats the engine, battery, cabin, and avionics. Power is routed to the elements through a dedicated wiring assembly with LED system power indication and circuit overload protection standard. The system is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours.

This preheat kit when installed will supply 533 watts to the engine with a 4.6 amp draw at 115 volts. When the battery heaters are also included you get 637 watts at 5.5 amps at 115 volts.
This preheat kit when installed will supply 533 watts to the engine with a 2.3 amp draw at 230 volts. When the battery heaters are also included you get 637 watts at 2.8 amps at 230 volts.

The Avionics heater is powered by a separate circuit and is 500 watts with an optional interior convenience outlet.

Battery heat based on firewall mounted battery box with RG24-15 or equivalent battery.

* Required Bonding sealant sold separately. Quantity 2, PN: TU02788

* AVF0001 form requested for verification of purchase.