Tanis Engine Preheat Kit - Wright Cyclone (R-1820 Series)

Engine Preheat System Kit – Wright Cyclone R-1820 series enginesThis preheat kit contains six pad heat elements on the engine AGB, and tank. This multipoint configuration fully preheats the engine and attached accessories for reduced wear on startup and reduced run-up times at any temperature. Power is routed to the elements through a dedicated wiring assembly with system power indication and circuit overload protection. System is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours.

This preheat kit when installed will supply 960 watts with a 8.3 amp draw at 115 volts.
This preheat kit when installed will supply 960 watts with a 4.2 amp draw at 230 volts.

* Required Bonding sealant sold separately. Quantity 3, PN: TAU02788
This kit is not eligible for an 8130-3.

* RTB0001 form required for purchase on certified engine installations.