Engine Preheat Kit for 4 cylinder Rotax 912/914/915 (all models)

This preheat kit contains heat elements located in each cylinder assembly, one threaded heat element on the engine crankcase (prop reduction gearbox or oil pump area) and a pad heat element bonded on the oil tank. This multipoint configuration fully preheats the engine and attached accessories. Power is routed to the elements through a dedicated wiring assembly with system power indication circuit overload protection and plug mounting options. System is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours.

The preheat kit will supply 220 watts with a 1.9 amp draw at 115 volts.
The preheat kit will supply 220 watts with a 1.0 amp draw at 230 volts.

* Required Bonding sealant sold separately. Quantity 1, PN: TU02788