Tanis Engine Preheat Kit - Jabiru 3300, 6 Cyl

Engine Preheat kit for 6 Cylinder; Jabiru 3300

This preheat kit contains threaded electrical resistance heat elements located in each cylinder assembly’s rocker cover, and one pad heat element bonded on the engine crankcase. This multipoint configuration fully preheats the engine and attached accessories. Power is routed to the elements through a dedicated wiring assembly with system power indication and circuit overload protection. System is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours.

The preheat kit will supply 280 watts with a 2.4 amp draw at 115 volts.
The preheat kit will supply 280 watts with a 4.8 amp draw at 230 volts.

* Required Bonding sealant sold separately. Quantity 1, PN: TU02788