Tanis Engine Preheat Kit - Continental, 4 Cyl

Engine Preheat Kit for Continental, CD-230, (CD-200) Jet-A Diesel engine Series

Certified engine numbers: TD-300-B, TD-300-C

This preheat kit contains threaded heat elements located in each cylinder assembly, and four pad heat elements for the engine crankcase, oil sump, oil cooler, and air/oil heat exchanger. This multipoint configuration fully preheats the engine and attached accessories. Power is routed to the elements through a dedicated wiring assembly with LED system power indication and circuit overload protection standard. The system is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours.

This preheat kit is compatible with all engine monitor systems as the threaded heat elements can replace either a rocker cover screw or intake bolt fasteners.

This preheat kit when installed will supply 500 watts with a 4.3 amp draw at 115 volts.
This preheat kit when installed will supply 500 watts with a 2.2 amp draw at 230 volts.

* Required Bonding sealant sold separately. Quantity 2, PN: TU02788