Tanis Engine Preheat Kit - Austro AE300, 4 Cyl

STC Engine Preheat Kit – Austro AE300 (E4) AND AE330 (E4P)

FAA-STC: # SE03232CH

TCCA acceptance of FAA-STC on file.

EASA-STC: # 10054417 (See AML for listing of engine; kit part number listed per FAA-STC)

This Engine preheat kit includes threaded elements located in the crankcase water jacket, sump, and prop reduction gearbox. Power is routed through a dedicated wiring assembly with system power indication and circuit overload protection. The system is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours.

The preheat kit will supply 400 watts with a 3.5 amp draw at 115 volts.
The preheat kit will supply 400 watts with a 1.7 amp draw at 230 volts.