Home > Tanis PreHeat >

Tanis STC Engine Preheat Kit - 4 Cylinder; Continental and Lycoming - 115 Volt - TSP4CYL-2925-115
STC Engine Preheat Kit 4 Cylinder, Continental and Lycoming
STC Engine Preheat Kit 4 Cylinder, Continental and Lycoming


 
STC Engine Preheat Kit 4 Cylinder, Continental and Lycoming PN: TSP4CYL-2925-115

STC Engine Preheat Kit
FAA-STC: # SE03232CH
TCCA acceptance of FAA-STC on file.
This preheat kit contains threaded electrical resistance heat elements located in each cylinder assembly, and one pad heat element on the engine crankcase/oil sump/tank. This multipoint configuration fully preheats the engine and attached accessories. Power is routed to the elements through a dedicated wiring assembly with LED system power indication and circuit overload protection standard. The system is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours.
This preheat kit when installed will supply 240 watts with a 2.1 amp draw at 115 volts.
* Required Bonding sealant sold separately, PN: TU02788 sold below
Sale Price: $820.00

Product Code: TANIS-TSP4CYL-2925-115

Tanis Bonding Sealant

Tanis Bonding Sealant 1 Oz Tube PN: TU02788 [$10.00]

Qty:  
Features Technical Specs
 
Review of Tanis Aircraft PreHeat

Share your knowledge of this product. Be the first to write a review »