JP Instruments TIT Probe

The Turbine Inlet Temperature (TIT) probe, is installed in the exhaust stack accumulator to a maximum depth of 1/2 inches and approximately 2-4 inches from the turbine inlet, on the wastegate side of the turbine. The TIT probe is shipped with a #48 stainless steel clamp.

• 1 Thermocouple Type K TIT Probe
• 1 Stainless Steel Clamp Thimble
• 1 Stainless Steel Exhaust Seal Washer
• 1 Stainless Steel Screw Type Clamp
• 1 10 Ft. Option Wire