The P-300C-Mini is assembled from a 3/16” stainless steel tube with an insulated wire as the center electrode and a 1/8”NPT or 1/4” NPT boss attached to one end. The electronics (P-300C-Mini Interface Module) are located externally from the
probe. The probe may be bent or cut to length in the field. The probe can be ordered from 2” to 72” in length. A P-300C/4Divide by 4 Interface module will be included at no charge for probe lengths that require one. Ordering the correct length is recommended.
Probes over 8' may incur additional packaging/shipping charges. Please allow a minimum of 3 weeks for your order to be shipped.
Please enter the length of the probe needed below in the space provided. (Specify 2" to 72")
