Electronics International P-300C Capacitive Fuel Level Probe w/Accessories
The P-300C is assembled from a 3/4" Aluminum pipe with an Aluminum center electrode and a 3/4" NPT boss attached to one end. The electronics (P-300C Interface Module) are located externally from the probe. The probe was designed to fit in a 3/4" NPT. Coupler and Guides, included with probe, are intended to be molded into a fiberglass fuel tank. You may wish to use other mounting methods appropriate for your fuel tanks. The probes may be ordered from 6" to 20' in length. A P-300C/4 Divide by 4 Interface module will be included at no charge for probe lengths that require one. Ordering the correct length is recommended, however you may cut the probes to a shorter length than ordered. Call Electronics International for cutting instructions.
Probes over 8' may incur additional packaging/shipping charges. Please allow a minimum of 3 weeks for your order to be shipped.
Please enter the length of the probe needed below in the space provided. (Specify 6" to 20')
Choose your options:Special Instructions(optional):
Probe Length (In Inches)Probe Length (In Inches)(optional):
