CGR-30C Cluster Gauge Replacement:

• Dimensions - 3.25” x 3.25” x 4.45” Deep, 3 1/8” Flush Mount
• Weight - 1.1 Pounds (Instrument Only)
• Power Requirements - 7.5 to 30 Volts, Typical: 0.2 amps @ 12 Volts, 0.1 amps @ 24 Volts
• Display - Active Matrix, Sunlight Readable
• Backlight - Fully Dimmable for Night Flights
• USB Port - Data Download and Software Updates
• Internal Storage - Up to 1,500 most recent flights stored. All monitored functions are stored up to three times per second. Recorded flight data can be easily downloaded via USB port.
• CGR-30C Certifications:
  • FAA STC’d as Primary Replacement
  • FAA TSO’d to DO-160G
  • FAA DO-178 Level C
  • Transport Canada Civil Aviation (TCCA) Validated STC
  • European Aviation Safety Agency (EASA) Validated STC

Engine Data Converter (EDC-33P) Specifications:

• Dimensions - 5.85” x 3.71” x 2.35” Deep
• Weight - 1 Pound (Instrument Only)
• Power Requirements - 7.5 to 30 Volts, Typical: 0.1 Amps
• Certifications - FAA TSO’d to DO-160G and DO-178 Level C
• Supported Channels: 1 Volt Channel, 1 Amp Channel, 1 Fuel Flow Channel, 6 Pressure Channels, 17 Temp Channels, 4 Resistive Fuel Level Channels, 4 Capacitive Fuel Level Channels and 2 RPM Channels

The CGR-30C provides several full-color strip gauges and/or arc gauges (see the alternative configuration below). These give pilots a quick reference view of critical parameters, along with digital readouts for the pinpoint accuracy expected from Electronics International products.

The CGR-30C offers an alternative Main Screen configuration with MP and RPM arcs.

The Secondary Screen is intended to display functions which do not need to be displayed continuously. This screen can display up to 6 secondary functions or additional primary functions that will not fit on the Main Screen. These primary functions will all annunciate to whichever screen you’re viewing if a limit is violated. The red and/or yellow range annunciators on the Secondary Screen will blink to alert the pilot of any potential problem with a primary function on the Main Screen.

Checklists can help ensure critical steps are followed in any phase of flight. Store up to 50+ custom checklists. Checklists can be created in a text editor, then uploaded via USB to the CGR-30C.

This CGR-30C Cluster Gauge Replacement screen allows you to download Flight Data to a USB flash drive and set the Data Sample Rate. The Data Sample Rate is the time interval between recorded data. The CGR-30C can record up to 1500 flights before it records over the oldest flight first.

The USB port may be found mounted in the instrument panel or hanging under it. Flight Data is recorded and downloaded in a comma-delimited format. This allows the file to be ported directly into Excel.