You will receive:
- 1 (one) shoulder harness (single diagonal, across torso)
- 1 (one) lap belt with new buckle & end fittings
- 8130-3 airworthiness certificate
- Certificate of conformance
LH/RH designation not required. Our restraints are interchangeable between pilot and co-pilot positions.
Mounting Location: This restraint is mounted in the upper structure, under the headliner & cover, behind the pilot or copilot.
This is NOT a replacement for inertial reels that are mounted under the window and secured with a 4-bolt reel. AmSafe does not have a reel that matches that footprint. A work around is available with a willing, appropriately rated mechanic who can create an overlay for mounting this reel. Please contact us for additional information.
Conformance: This restraint is approved for the aircraft models listed because you are replacing a TSO item with a TSO item. Please see FAQ’s in our resources section for additional information on this subject.
The aircraft has existing, factory installed attachment points, or attachment points that have been added with an approved installation kit.
This installation will require a log book entry signed by an appropriately rated mechanic.
EXCLUSION: a reel mounted below the window and secured by 4 bolts.