Home > Accessories > Electronics International Accessories >

Electronics International FT Flow Transducer (60, 90, 180)
Electronics International FT Flow Transducer (60, 90, 180)
Electronics International FT Flow Transducer (60, 90, 180)


 
Alternative Views:


Fuel Flow Transducer, please select model from below:

FT-60 Fuel Flow Transducer (Red Cube): To be used with engine-driven fuel pumps only up to 350 HP engines. Red anodized Aluminum body, 1/4" female NPT, .6 to 70+ GPH, .6 PSI drop at 30 GPH, 2.3 PSI drop at 60 GPH, K-Factor approximately 68,000, 5.3 Oz.

FT-90 Fuel Flow Transducer (Gold Cube): For 350 to 550 HP engines, or gravity feed engines. Gold anodized Aluminum, 1/4" female NPT, 3 to 125+ GPH, .05 PSI drop at 20 GPH, .2 PSI drop at 40 GPH, K-Factor approximately 33,800, 5.3 Oz.

FT-180 Fuel Flow Transducer (Black Cube): Black anodized Aluminum body, #8 male flare fittings, 5 to 250+ GPH, .23 PSI drop at 60 GPH, .92 PSI drop at 120 GPH, K-Factor approximately 22,400, 5.3 Oz. The Electronics International FT-180 doesn't require the IU-1 Foxboro Interface Unit.


Product Code: FT-FLOW-TRANSDUCER

Models

FT-60 Fuel Flow Transducer (Red Cube) [$296.00]
FT-90 Fuel Flow Transducer (Gold Cube) [$296.00]
FT-180 Fuel Flow Transducer (Black Cube) [$496.00]
Special Instructions


Add 8130 Certificate

If you need an 8130, must be added when ordering [$220.00]
ADD C of C

Certificate of Conformity [$15.00]

Qty:  
Description
 
FT-60 Fuel Flow Transducer (Red Cube): To be used with engine-driven fuel pumps only up to 350 HP engines. Red anodized Aluminum body, 1/4" female NPT, .6 to 70+ GPH, .6 PSI drop at 30 GPH, 2.3 PSI drop at 60 GPH, K-Factor approximately 68,000, 5.3 Oz.
FT-90 Fuel Flow Transducer (Gold Cube): For 350 to 550 HP engines, or gravity feed engines. Gold anodized Aluminum, 1/4" female NPT, 3 to 125+ GPH, .05 PSI drop at 20 GPH, .2 PSI drop at 40 GPH, K-Factor approximately 33,800, 5.3 Oz.
FT-180 Fuel Flow Transducer (Black Cube): Black anodized Aluminum body, #8 male flare fittings, 5 to 250+ GPH, .23 PSI drop at 60 GPH, .92 PSI drop at 120 GPH, K-Factor approximately 22,400, 5.3 Oz. The Electronics International FT-180 doesn't require the IU-1 Foxboro Interface Unit.

Share your knowledge of this product. Be the first to write a review »