Home > Lights >

AeroLEDs Experimental Pulsar-NS/NSP Series Navigation Lights
AeroLEDs Experimental Pulsar Navigation Lights
AeroLEDs Experimental Pulsar Navigation Lights


 
Pulsar NS Navigation/Strobe LED Lights are one of the industry’s smallest foot-prints, making them optimal for multiple designs for wingtips and for wingtip cutouts. The Pulsar NS Navigation Light Series also uses the legacy three position mounting footprint on their brackets. These lights require no external power supply! The Pulsar NS Navigation Light replace the traditional Xenon Strobe 650 series. They are Certified Class FAA, TSO C-30c Type I and II.

Please choose and select from the models below:

PULSAR EXP (Pair of units)
Product Number: 01-1040
Power: 22 Watts (Per Pair)
Voltage: 9-22 VDC
Lumens: N/A
Weight: 6.6 oz
Dimensions: 7" x 1.9" x 1.5"

Product Code: AEROLEDS-EXPE-PULSAR-NAV

Models

Experimental Pulsar NS (Pair), Model Number 01-1280-B12 [$850.00]
Experimental Pulsar NS (Left), Model Number 01-1280-B12-L [$425.00]
Experimental Pulsar NS (Right), Model Number 01-1280-B12-R [$425.00]
Experimental Pulsar NS (Pair), Model Number 01-1280-B-24 [$850.00]
Experimental Pulsar NS (Left), Model Number 01-1280-B-24-L [$425.00]
Experimental Pulsar NS (Right), Model Number 01-1280-B-24-R [$425.00]
Experimental Pulsar NSP (Pair), Model Number 01-1280-C-12 [$900.00]
Experimental Pulsar NSP (Left), Model Number 01-1280-C-12-L [$450.00]
Experimental Pulsar NSP (Right), Model Number 01-1280-C-12-R [$450.00]
Experimental Pulsar NSP (Pair), Model Number 01-1280-C-24 [$900.00]
Experimental Pulsar NSP (Pair), Model Number 01-1280-C-24-L [$450.00]
Experimental Pulsar NSP (Right), Model Number 01-1280-C-24-R [$450.00]
Mount Type

Pulsar NS Mount Kit (Includes Single Bracket) [$30.00]
Pulsar Mount Kit (Includes Single Bracket) [$30.00]

Qty:  
Features Technical Specs Information
 
Features
What is the difference between the Pulsar NS and the Pulsar NSP?
The Pulsar NS has a forward red or green navigation light, and a strobe that covers 180 degrees from each wing tip.
The Pulsar NSP has a forward red or green navigation light, a strobe that covers 180 degrees from each wing tip, and a rear white position light.
What are the installation requirements for the Sunspot 36?
The Sunspot 36LX landing and taxi lights can be installed with just a log book entry if you can install the light in an existing mount and use the existing wires, switches, and circuit breakers.
The Sunspot 36HX landing and taxi lights can be installed with the pulse function enabled in a Cessna 185 under STC, or in other aircraft models with a 337 that uses the Cessna 185 STC as a basis for approval.
What are the installation requirement for the TSO Lights?
If the lights are mounted to an existing mounting location with no structural modifications, and existing wiring can be re-used, the lights can be installed with a log book entry.
If there are modifications to the wiring, a 337 should be submitted for approval for the installation.
If there are structural modifications made to mount the lights, a more extensive approval may be required, ranging from a 337 to an STC.
What are the recommended wire for the Pulsar and Suntail lights?
We recommend 3 conductor 20 gauge shielded single bundle wire, which we have available in our accessories area.

Share your knowledge of this product. Be the first to write a review »