Home > Tanis PreHeat >

Tanis STC Engine Preheat Kit - 6 Cylinder; Continental, Lycoming, and Franklin 230 volt - TSP6CYL-2927-230
Tanis STC Engine Preheat Kit 6 Cylinder Continental, Lycoming, and Franklin 230 volt
Tanis STC Engine Preheat Kit 6 Cylinder Continental, Lycoming, and Franklin 230 volt


 
Tanis STC Engine Preheat Kit 6 Cylinder Continental, Lycoming, and Franklin 230 volt PN: TSP6CYL-2927-230
STC Engine Preheat Kit - 6 Cylinder; Continental, Lycoming, and Franklin - 230 Volt
FAA-STC: # SE03309CH
TCCA acceptance of FAA-STC on file.
This preheat kit contains threaded electrical resistance heat elements located in each cylinder assembly, and two pad heat elements for on the engine crankcase/oil sump/oil tank. This multipoint configuration fully preheats the engine and attached accessories. Power is routed to the elements through a dedicated wiring assembly with LED system power indication and circuit overload protection standard. The system is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours.
This preheat kit when installed will supply 460 watts with a 2.0 amp draw at 230 volts.
* Required Bonding sealant sold separately, PN: TU02788 see below


Sale Price: $1,200.00

Product Code: TANIS-TSP6CYL-2927-230

Tanis Bonding Sealant

Tanis Bonding Sealant 1 Oz Tube PN: TU02788 [$10.00]

Qty:  
Features Technical Specs
 

Share your knowledge of this product. Be the first to write a review »