Home > Vortex Generators > Replacement Parts >

Micro Aero Dynamics Aircraft Micro Vortex Generator Repaint Kit Single Engine Aircraft
Micro VG Repaint Kit Single Engine Aircraft
Micro VG Repaint Kit Single Engine Aircraft

Alternative Views:

Micro VG Repaint Kits

A Micro VG Repaint Kit is a complete replacement kit sold at a reduced price. The Repaint kit contains everything that was in the original kit except for the STC and Strakes (if applicable to your model). It is sold ONLY for aircraft serial numbers that have previously been fitted with one of Micro AeroDynamics’s Vortex Generator STCs for the reinstallation of the VGs during paint or damage repair. Most original installations are done on top of existing paint, and during the installation process, the paint is abraded slightly in the area to be glued, prior to gluing the VG. Since the vortex generators are glued to the paint, when a customer goes to the paint shop and the aircraft is stripped, the VGs usually come off. Installation of Alodined VGs can be made directly onto the alodine surface of the aircraft and painted in place during the repainting process, or painted off the aircraft at the same time as the plane is painted ( See -- Painting Tips ), then reinstalled on top of the paint after appropriate cure time. Micro VG repaint kit is a convenience for the customer – not a requirement. There is nothing in the STC that precludes the customer from cleaning up the removed VGs and re-installing them with Loctite Depend 330 Adhesive and locating them on the aircraft using the drawings that were contained in the original kit.

If installed by Blue Skies Aviation, there is a 10% discount off of the Micro Vortex Generators. The discount is given at the time of the installation, off of the installation cost.

Sale Price: $265.00


Model Number

Special Instructions

Aircraft make and model

Existing aerodynamic modifications:

Extended wings on aircraft?

Features Technical Specs

A Micro VG Repaint Kit Contains

  • All new alodined Vortex Generators
  • Installation Tools
  • New templates for positioning VGs
  • New Adhesive (Loctite Depend 330 Adhesive)
  • Detailed drawings and instructions
  • Mail pouch for the return of the removed vortex generators

Share your knowledge of this product. Be the first to write a review »