Knots2U Piper PA-24 Tips Fins Fairings
|
|
Alternative Views:
|
 |
 |
 |
|
Fiberglass Stabilator Tip, RH or LH. Piper Comanche PA-24, PA-30 - Part Number: GF21556-00
- Approval Basis: FAA-PMA Approved
- Replaces: Piper Part 20196-00, 20196-000, 21556-00, 21556-000
- Aircraft Eligibility: Piper PA-24-180, PA-24-250, PA-24-260, PA-30 s/n 30-2 thru 30-1716 and 30-1718 thru 30-1744 inclusive
- Typical Lead Time: 1-4 Days
- Finish: White Primer, ready for paint fiberglass laminate
- Notes: RH and LH are identical
Fiberglass Stabilator Tip, RH or LH. Piper Comanche PA-24 - Part Number: GF28041-00
- Approval Basis: FAA-PMA Approved
- Replaces: Piper Part 28041-00, 28041-000
- Aircraft Eligibility: Piper PA24-250, PA-24-260. (Use if stabilator modification kit 760-747 has been installed.)
- Typical Lead Time: 1-4 Days
- Finish: White Primer, ready for paint fiberglass laminate
- Notes: RH and LH are identical
Fiberglass Lower Scoop Inlet. Piper PA-24- Part Number: GF21143
- Approval Basis: FAA-PMA Approved
- Replaces: Piper Part 21143-00, 21143-000
- Aircraft Eligibility: PA24 (not for use on aircraft with cowl P/Ns 21950-07/-14, 22858-02, 22857-12, 24895-02/-17 or if carburetor air filter kit is installed)
- Typical Lead Time: 3-5 days
- Finish: white primer ready for paint fire rated fiberglass laminate
Piper PA-24 Comanche Cowl Scoop- Part Number: K21947-00
- Approval Basis: FAA - PMA Approved
- Replaces: Piper Part 21947-00, 21947-000, 21947-03, 21947-003, 23134-00, 23134-000.
- Aircraft Eligibility:Piper PA-24-180 & PA-24-250 S/N 24-1477 thru 24-2843. PA-24-250 S/N 24-103 thru 24-1476 if carburetor air filter kit 754 285 has been installed. PA-24-180 S/N 24-2844 thru 24-3163, PA-24-250 S/N 24-2844 & Up, PA-24-180 & PA-24-260 S/N 24-3164 & Up.
- Typical Lead Time: 0-6 Days
Scoop-Cabin Air Inlet. Piper PA-24-180 & PA-24-250- Part Number: K21933-00
- Approval Basis: FAA-PMA Approved
- Replaces: Piper Part 21933-00, 21933-000
- Aircraft Eligibility: Piper PA-24-180 S/N 24-1330 & Up. PA-24-250 S/N 24-1330 & Up.
- Typical Lead Time: 1-4 Days
- Finish: White, ready for paint Fiberglass Laminate
Fiberglass Rudder Tip ( Antenna Slot) Piper Comanche PA-24 - Part Number: GF21555-02
- Approval Basis: FAA-PMA Approved
- Replaces: Piper Part 20186-00, 20186-000, 21555-02, 21555-002
- Aircraft Eligibility: Piper PA-24-180, PA-24-250
- Typical Lead Time: 1-4 Days
Fiberglass Vertical Fin Tip. Piper Comanche PA-24 - Part Number: GF21557-00
- Approval Basis: FAA-PMA Approved
- Replaces: Piper Part 20732-00, 20732-000, 21557-00, 21557-000
- Aircraft Eligibility: Piper PA-24-180, PA-24-250
- Typical Lead Time: 1-4 Days
Product Code: KNOTS2UPIPERPA24FAIRINGS
|
|
|
|
|
|
 |
|
 |
|
|
