Home > Engine Monitors > Electronics International Aircraft Engine Monitors > Electronics International Certified Glass Panel Displays >

MVP-50T, Turboprop and Jet Primary Replacement $`1000 Mail In Rebate
Electronics International MVP-50T, EI Rebate
Electronics International MVP-50T


 
Alternative Views:


The MVP-50T has redefined what a Turboprop engine analyzer should be. This premiere engine monitoring dynamo includes accurate, programmable monitoring for all major Turboprop functions, including N1, N2, ITT, Torque, Oil Pressure, Oil Temperature, Volts, Amps, Fuel Level, Fuel Flow, Time to Empty, and many other critical functions. In addition, the MVP-50T offers pilots customized, interactive checklists, custom information screens, Programmable Temp Limits, Data Recording Capabilities, and the convenience of a USB Port on the front of the bezel for easy changes in configurations, data recording downloads and other critical files. The bottom line is that there is no other system that even comes close to offering the functionality provided by the MVP-50T!

Programmable Over and Under Temp Limits
These limits provide pilots with immediate alerts whenever critical function parameters are exceeded during flight.

Onboard Data-Recording

This on board functionality gives pilots the capability to review entire flight histories for any flight. The System Screen is dedicated to aircraft systems, including flaps, trim and rudder, as well as whatever other functions you want to view.

Customizable Checklists

Allow the MVP-50T to visually inform you which steps have and have not been completed in each checklist.

General Information Screens and Flight Plan Screens

These screens can be customized to store critical flight information, allowing you to create a “virtual cockpit,” free of the pieces of paper pilots regularly have to juggle to stay on top of in-flight operations.

Onboard USB Port

This conveniently located port allows pilots to quickly change configurations, update firmware, upload checklists, upload flight plans, upload general information screens, and download critical flight data logs. Options are connected to the MVP through the EDC, an external box. The EDC provides 9-pressure channels, 13-temperature channels, 4 fuel level channels, 2 RPM channels, 1 Fuel Flow channel, 1 Amp channel and 1 Volt channel. If you run out of channels, an additional EDC may be purchased and added on to the MVP. Click on the check box next to the option you would like to add and fill out the information, if needed, in special instructions.

For faster processing, print the order form out and complete it. Scan it into your computer to upload the order form during checkout or email it to sales@emapa.aero

Click Here for the 2019 Sun N' Fun MAIL In Rebate Form

EI MVP 50 Red Line Questionnaire Fill out and E-mail to: sales@emapa.aero


Availability:: Usually Ships in 2 to 3 Business Days
Product Code: MVP-50T

Models

MVP-50T-A-C Allison Turboprop [$9,940.00]
MVP-50T-G Garrett Turboprop [$9,940.00]
MVP-50T-J85-C General Electric J85 Jet Engine [$9,940.00]
MVP-50T-L-C Lycoming Turboprop [$9,940.00]
MVP-50T-PT6 Pratt & Whitney Turboprop [$9,940.00]
MVP-50T-Twin-C-Twin Engine [$21,200.00]
MVP-50T-W-C Walters Turboprop [$9,940.00]
MVP-50T-WJ33 Williams J33 Jet Engine [$9,940.00]
Special Instructions


3/4" Cap. Fuel Level Probe

[$249.00]
Add four 6' wire cables to connect

[$59.00]
Airspeed: PT-05Diff

[$150.00]
Aux Volt/ Amp module (FM-VA-3)

[$195.00]
Cabin Altitude: PT-30ABS

[$150.00]
Cabin Differential Pressure

[$150.00]
FLAM-1

[$475.00]
G-Meter

[$495.00]
H20 Pressure, PT-05H20

[$250.00]
Hydraulic Pressure PT-3000S

[$250.00]
Magnetic Float Sensor P-300M

[$349.00]
MVP-50PT Carbon Monoxide Detector

[$459.00]
MVP-50PT Mini Capacitive Fuel Level

[$148.00]
Pressure Altitude PT-30Alt

[$395.00]
Real time data out

[$667.00]
Resistive Fuel Level Module

[$98.00]
Type K Cable XDO-6' extension cable

[$39.00]
Vacuum Pressure PT-05Diff

[$150.00]
Accessories

Please choose from the selections below
Alumium Panel for installation [$38.50]
Display parameters in a 2nd location [$5,200.00]
EDC-33T Engine Data Convertor [$1,950.00]
Accessories (2)

Please choose from the selections below
CP-1-MVP LED controls display intensity [$39.00]
USB memory 128 MP+ download, upload data [$35.00]

Qty:  
Features Technical Specs Information
 
MVP-50T
Features

N1 and N2

The RPM's are displayed in large, bright, crisp digits as well as in a 270 degree graphic arc, so you can simultaneously monitor RPM at a glance and with precision accuracy. Wires from the EDC-33T wire harness connect to the outputs of the Tach Generators.

Torque

The MVP-50 provides pilots with precision digital torque readings, along with a 270 degree graphic arc, so pilots can determine at a glance where the Torque is currently, and can likewise see within 1% the current Torque reading.

ITT

During start up, the ITT readings must be kept under red line to avoid costly damage to the engine stator fans. The MVP-50T keeps a close watch on the ITT during all engine operations, and provides pilots with precision accuracy along with a graphical arc for immediate visual reference.

Engine Pressures

The MVP-50T watches over Fuel Pressure and Oil Pressure, and displays both in digital and strip gauge formats for quick and accurate reference.

Fuel Flow

The main screen constantly displays the current fuel flow, accurate to .1 gph, in both digital and strip gauge formats. Proprietary algorithms allow rapid response to engine adjustments without irritating, jumpy readings.

Fuel Levels

The MVP-50T can monitor several fuel levels, but two main fuel levels are constantly displayed on the Main Screen in digital and strip gauge formats for quick and accurate reference.

Electrical System

The precise resolution of .1 volts and .1 amps allows you to accurately monitor and manage the load on your aircraft electrical system and the health of your battery.

Timers

Select from Up Timers, Down Timers, Flight Time and Clocks.

Red lines & Operating Ranges

Regardless of the parameter you monitor with the MVP-50P, the operating ranges are completely programmable. The MVP-50 will alert you via visual and/or audible alarms when a parameter exceeds the programmed limits.

Annunciator Panel

The MVP-50T boasts a panel that can be customized with annunciators that are constantly view able on the Main Screen. This way, if a baggage door is open, pitot heat is on, or any other parameter needing to be monitored reaches or exceeds a red line, the pilot will be notified immediately of the condition.

Choose Your Functions

Several different functions are available, including Gyro Vacuum, Flaps, Hydraulic Pressure, Pressure Altitude, Airspeed, virtually any temperature or pressure, plus more! Or, add an additional voltage or amps to monitor a secondary bus. The MVP-50T even allows you to create and name your own functions. The options are nearly limitless.

Overview

The MVP-50 records each flight, which allows you to perform post-flight analysis on the engine and system parameters of your aircraft. When you decide to review the flights, simply download them via the USB port and upload them to your computer. Either view them in EGView, or look at the numbers in a number-crunching program such as Excel.

Flight Logs

Each flight has a Flight Log assigned to it, which contains the flight in its entirity. The MVP-50 permits you to adjust how often data is stored, so it is possible to record parameters as often as three times per second to as little as once per six minutes. Each Flight Log is also time and date stamped for easy identification, so you don't need to remember which flight is which when scrolling through your Flight Log history.

Min/Max Logs

If you don't want to analyze an entire flight, simply review the minimum and maximum flight logs stored in the MVP-50. These logs are a simple history of the maximum and minimum parameters reached during specific flights. These logs are stamped with the same flight number as their corresponding flight log, so if you decide to analyze the entire flight, you can easily identify it by its number.


Overview

The MVP-50 records each flight, which allows you to perform post-flight analysis on the engine and system parameters of your aircraft. When you decide to review the flights, simply download them via the USB port and upload them to your computer. Either view them in EGView, or look at the numbers in a number-crunching program such as Excel.

Flight Logs

Each flight has a Flight Log assigned to it, which contains the flight in its entirety. The MVP-50 permits you to adjust how often data is stored, so it is possible to record parameters as often as three times per second to as little as once per six minutes. Each Flight Log is also time and date stamped for easy identification, so you don't need to remember which flight is which when scrolling through your Flight Log history.

Min/Max Logs

If you don't want to analyze an entire flight, simply review the minimum and maximum flight logs stored in the MVP-50. These logs are a simple history of the maximum and minimum parameters reached during specific flights. These logs are stamped with the same flight number as their corresponding flight log, so if you decide to analyze the entire flight, you can easily identify it by its number.



Share your knowledge of this product. Be the first to write a review »