Home > Fuel Management > Electronics International Fuel Flow Aircraft Instruments >

Electronics International FL-1 Fuel Level Instrument, Not STC'd
Electronics International FL-1
Electronics International FL-1 Fuel Gauge


 

The FL-1 offers pilots an accurate, stable digital fuel level for single tank configurations. Not only does the FL-1 display the tank level digitally, it also provides a 210 degree graphical arc for immediate, quick reference of the tank fuel level.

The FL-1 can be ordered to work with a resistive probe (FL-1R-12 or FL-1R-24, depending on 12 or 24 volts), a capacitive probe (FL-1CA) or a 0-5 volt output (such as with some Skysports probes (FL-1V). Please be sure to specify which model you need when you order your FL-1.

The FL-1 is not STC'd for installation in a certified aircraft.

Kit Includes

Instrument, Wire Harness,Installation and Operating Instructions.

Sale Price: $390.00

Product Code: FL-1-FUEL-LEVEL-INSTRUMENT

Models

FL-1CA used with E.I's Capacitive Fuel Level Probe P-300C 6" - 20' long
FL-1RA-12 used with 12V system with resistive fuel level sensorThe fuel level's sensor's resistance may increase or decrease as fuel is added to the tank and the maximum resistance must be between 90 and 270 ohms.
FL-1RA-24 used with 24V system with resistive fuel level sensorThe fuel level's sensor's resistance may increase or decrease as fuel is added to the tank and the maximum resistance must be between 90 and 270 ohms.
Special Instructions


Aircraft make and model



Qty:  
Features Technical Specs Information
 
Features

Analog Display

210 Degree,analog arc with green, yellow and red LED's.

Digital Display

Large, crisp,LCD display with adjustable back lighting for night operations.

Data Recording

The FL-1 can be modified for $98 to output data to Electronics International's MUX-8A. This allows pilots to review critical system information for flights.

Fuel Slosh Stabilization

When in flight, fuel will slosh around in the aircraft fuel tanks, creating irritating readings that constantly jump around. The FL-1 has a Fuel Slosh Stabilization calibration point that averages fuel level readings, creating a much more stable, but still extremely accurate fuel reading. Calibrate between a couple of seconds all the way up to over a minute of fuel slosh averaging.

9 Calibration Points

The FL-1 allows installers to program from as little as two all the way up to nine fuel level calibration points in the fuel tank. This flexibility eliminates inaccuracies due to non-linear fuel tanks.

Easy Programming Interface

The FL-1 is a simple instrument to install and program. Clear step-by-step instructions make programming the instrument easy to calibrate to your fuel tank senders.

Able to Customize Units

The pilot can easily select between displaying fuel level in Liters, Gallons or Lbs with a switch on the front of the instrument panel.


Share your knowledge of this product. Be the first to write a review »