Home > Aircraft Instruments > Electronics International Aircraft Instruments > Single Gauges >

Electronics International ASC-5A Altitude Alert Super Clock
Electronics International ASC-5A Altitude Alert Super Clock Aircraft Gauges
Electronics International ASC-5A Altitude Alert Super Clock Aircraft Gauges


 

Clock: The ASC-5A is a fully functional, panel mounted aircraft clock. Choose between local time or Zulu Time, and between 12/24 formats. The Up Timers and Down Timers have programmable alarms that will alert you at custom intervals, which is perfect for checking waypoint status, remembering to switch tanks, or for any of the other tasks for which you need an intermittent reminder.

Non-Volatile Memory: With the ASC-5A installation, it is not necessary to keep the clock attached to battery power. Non-Volatile memory ensures the clock is always accurate, to the second, without having to keep the instrument constantly powered up.

Altitude: The ASC-5A is not only a world-class aviation clock, it is an altitude management system as well. The instrument displays both ATC Altitude (picked up in between the Encoder and Transponder), and Density Altitude. The Density Altitude is corrected for by barometric pressure (input by pilot) and an Outside Air Temperature probe, which comes standard with the ASC-5A. Pilots can program alarms that will alert when they've reached a programmed altitude. Then, a Deviation alarm will alert when the altitude deviates too far from the programmed Destination Altitude. These tools are perfect for reaching and maintaining ATC assigned altitudes, Minimum Decision Altitudes, or whatever cruise altitude you decide during a VFR flight.

IFR Capable: Because the clock is accurate to the second, the FAA considers the ASC-5A to meet the requirements for IFR flying.

Installation: The ASC-5A can be installed as a minor alteration, with a logbook entry. No STC certifications or field approvals are required!

Kit Includes: ASC-5A, OAT probe, 6' OAT extension cable and wire harness. Connectors for your altitude encoder are not included. A Voice Annunciator can be added to the order below by checking the box.

Sale Price: $470.00

Availability:: In Stock
Product Code: ASC-5A-ALTITUDE-ALERT

Special Instructions



Qty:  
Features Technical Specs
 
Features
  • Display Modes: BAR, Displays Barometric Pressure setting.
  • ALT: Displays Encoder Altitude or Assigned Altitude, determined by the Display Configuration setting.
  • OAT: Displays Outside Air Temp in degrees Fahreneit (F) or Degrees Celsius (C).
  • TIMER: Displays the time on the Up or Down Timer. The Up Timer will automatically start when your aircraft reaches an elevation of 300 feet above the ground.
  • Accuracy Altitude: +/- 50 feet plus the accuracy of your Altitude Encoder typically +/- 125 feet).
  • OAT: +/- 2% in accordance with TSO-C43a.
  • Timer: +/- .005% plus +/- .5 second.
  • Clock: +/- 2 minutes/month
  • Resolution BAR: .01 Inches of Mercury
  • OAT: 1F or 1C (Programmable)
  • Timer: 1 second resolution (switches to 1 minute resolution for readings over 59 minutes and seconds).
  • Clock: 1 minute.
  • Maximum Displayed Range or Setting BAR Setting: 28.00 to 29.00 Inches of Mercury, or 900 to 1199 millibars
  • Altitude(Displayed): -1000 to 30,500 feet.
  • Assigned Altitude (Setting): 0 to 99,000 feet.
  • Approach Altitude (Setting): 0 to 99,000 feet.
  • OAT (Displayed): -99F to 1999F (-87C to 999C).
  • TIMER (Displayed): 00:00 to 17 hours, 59 Minutes.
  • Recurring Alarm/Start Time (Setting): -00:00 to 99 Minutes, 59 Seconds.

Share your knowledge of this product. Be the first to write a review »