Home > Vortex Generators > Cessna >

Cessna 150, 150A-E Micro Aero Dynamics Aircraft Vortex Generators
Cessna 150, 150A-E Micro Vortex Generators
Cessna 150, 150A-E Micro Vortex Generators


 
The Micro Vortex Generators for the Cessna 150, 150A, 150A, 150B, 150C, 150D, 150E are FAA, STC approved. It provides a reduction in stall speed, improved aileron response, improved characteristics, reduced landing and takeoff roll.
The Micro VG Kit consists of 88 Vortex Generators mounted on the wings, just aft of the leading edge and 26 Vortex Generators mounted on the vertical stabilizer. The kit includes the STC detailed drawings, instructions, templates for positioning the VGs, spares, Loctite Depend adhesive and all the materials needed for the easy one day installation except a bottle of isopropyl alcohol, a ladder and a roll of paper towels.
The Micro Vortex Generators are manufactured under FAA PMA from aircraft grade 6063-T6 Aluminum, alodined to a Boeing mil-spec, ready for painting. Each VG is curved on the bottom to fit the contour of the wing. Easy one day professional installation. If installed by Blue Skies Aviation, there is a 10% discount off of the Micro Vortex Generators. The discount is given at the time of the installation, off of the installation cost.

Please choose from the models below and write it in the space provided:
150, 150A, 150B, 150C, 150D, 150E

The VGs can be painted to match your plane for an additional $200 per color, please specify the information below.

CFII Dick Britton reported about Micro VGs:
"Improved controllability at slow speed"
"More perky, gets off the ground quicker"
"Improved stability, a more stable ride"

Sale Price: $695.00


Product Code: CESSNA-150-AND-150A-E

Add 8130 for Micro VGs

Specify location for the 8130 Certificate in special instructions (International Orders Require One) [$110.00]
Model Number


Special Instructions


Aircraft make and model


Existing aerodynamic modifications:


Extended wings on aircraft?


Paint color/s and product code


Pre-painted Micro VG

Without paint
One additional color [$265.00]
Two additional colors [$530.00]
Three additional colors [$795.00]

Qty:  
Features Technical Specs Information
 
Features

A Micro Vortex Generator

Creates a tiny vortex in the airstream over an airfoil. This vortex energizes the normally stagnant boundary layer of air on the wing's surface. An energized boundary layer is more resistant to flow separation than a stagnant boundary layer. The result is that airflow "sticks" to the wing better, permitting flight at lower airspeeds with improved control authority.


Share your knowledge of this product. Be the first to write a review »