Home > Vortex Generators > Champion >

Aeronca Champ & Chief Champion 7AC, 7ACA, 7BCM, 7CCM, 7DC, 7EC, 7FC, 11AC, S11AC, 11BC, S11BC, 11CC, S11CC Micro Aero Dynamics Aircraft Vortex Generators
Aeronca Champ & Chief Champion 7AC, 7ACA, 7BCM, 7CCM, 7DC, 7EC, 7FC, 11AC, S11AC, 11BC, S11BC, 11CC, S11CC Micro Vortex Generators
Aeronca Champ & Chief Champion 7AC, 7ACA, 7BCM, 7CCM, 7DC, 7EC, 7FC, 11AC, S11AC, 11BC, S11BC, 11CC, S11CC Micro Vortex Generators


 
The Micro Vortex Generators for the Champion 7AC, Champion 7ACA, Champion 7BCM, Champion 7CCM, Champion 7DC, Champion 7EC, Champion 7FC, Champion 11AC, Champion S11AC, Champion 11BC, Champion S11BC, Champion 11CC, Champion S11CC are FAA, STC approved. This provides a virtual elimination of Vmc, a dramatic improvement in characteristics, reduced stall speeds by 8%, reduced approach speeds, reduced accelerate/ stop distance and improved safety. There also reduces Vs and Vso. This has an easy one day professional installation time.

The Micro VG Kit consists of 80 Vortex Generators mounted on the wings, just aft of theleading edge and 24 Vortex Stabilizers mounted under the horizontal stabilizer. The kit includes the STC detailed drawings, instructions, templates for positioning the VGs, spares, Loctite Depend adhesive and all the materials needed for the easy one day installation except a bottle of isopropyl alcohol, a ladder and a roll of paper towels. This is an easy one day professional installation. If installed by Blue Skies Aviation, there is a 10% discount off of the Micro Vortex Generators. The discount is given at the time of the installation, off of the installation cost.

Please choose from the following models and write it in the space provided:
Champion 7AC, Champion 7ACA, Champion 7BCM, Champion 7CCM, Champion 7DC, Champion 7EC, Champion 7FC, Champion 11AC, Champion S11AC, Champion 11BC, Champion S11BC, Champion 11CC, Champion S11CC

The Micro Vortex Generators are manufactured under FAA PMA from aircraft grade 6063-T6 Aluminum, alodined to a Boeing mil-spec, ready for painting. Each VG is curved on the bottom to fit the contour of the wing. Easy one day professional installation.

The VGs can be painted to match your plane for an additional $200 per color, please specify the information below.

"The Micro VGs do everything you said they would do and more -- the tail of my 310 thinks it's four feet taller and the rudder thinks it's two feet longer!" -one Cessna 310 owner
Sale Price: $695.00


Product Code: CHAMPION-7AC_S11CC

Model Number


Special Instructions


Aircraft make and model


Existing aerodynamic modifications:


Extended wings on aircraft?


Paint color/s and product code


Pre-painted Micro VG

Without paint
One additional color [$265.00]
Two additional colors [$530.00]
Three additional colors [$795.00]

Qty:  
Features Technical Specs Information
 
Features

A Micro Vortex Generator

Creates a tiny vortex in the airstream over an airfoil. This vortex energizes the normally stagnant boundary layer of air on the wing's surface. An energized boundary layer is more resistant to flow separation than a stagnant boundary layer. The result is that airflow "sticks" to the wing better, permitting flight at lower airspeeds with improved control authority.


Share your knowledge of this product. Be the first to write a review »