Home > Lights >

AeroLEDs Certified Pulsar Na NS/NSP Lights PN 11-1280
AeroLEDs Certified Pulsar Navigation Lights
AeroLEDs Certified Pulsar Navigation Lights


 
The Pulsar NS Series Navigation Lights are LED Navigation and Strobe Lights designed for airplane wingtips and wingtip cut-outs. Another feature of the Pulsar NS is that it does not need an external power supply! These LED Navigation Lights will also retrofit the mounting impression of traditional halogen airplane lighting. This light is the same size as the typical forward and rear facing LED Position Lights, making for ease in replacement. The lights are TSO Approved and Certified and met C-30c, Type I, II and III, and C-96a, Class II.

Please choose and select from the models below:

PULSAR NS (Pair of units)
Product Number: 11-1280-B-12 TSO Certified
Power: 22 Watts (per pair)
Voltage: 9-18 VDC
Lumens: Exceeds TSO candela requirements
Weight: 6.6 oz
Dimensions: 4" x 1.9 X 1.5""

PULSAR NSP (Pair of units)
Product Number: 11-1280-B-24 TSO Certified
Power: 52 Watts (Per Pair)
Voltage: 18-36 VDC
Lumens: Exceeds TSO candela requirements
Weight: 6.6 oz
Dimensions: 4" x 1.9" x 1.5"

INSTALLATION INSTRUCTIONS

Product Code: AEROLEDS-CERT-PULSAR-NAV

Models

Pulsar NS (Pair), Model Number 11-1280-B-12 [$1,125.00]
Pulsar NS (Left), Model Number 11-1280-B-12-L [$550.00]
Pulsar NS (Right), Model Number 11-1280-B-12-R [$550.00]
Pulsar NSP (Pair), Model Number 11-1280-B-24 [$1,125.00]
Pulsar NS (Left), Model Number 11-1280-B-24-L [$550.00]
Pulsar NSP (Right), Model Number 11-1280-B-24-R [$550.00]
Special Instructions



Qty:  
Features Technical Specs Information
 
Features
What is the difference between the Pulsar NS and the Pulsar NSP?
The Pulsar NS has a forward red or green navigation light, and a strobe that covers 180 degrees from each wing tip.
The Pulsar NSP has a forward red or green navigation light, a strobe that covers 180 degrees from each wing tip, and a rear white position light.
What are the installation requirements for the Sunspot 36?
The Sunspot 36LX landing and taxi lights can be installed with just a log book entry if you can install the light in an existing mount and use the existing wires, switches, and circuit breakers.
The Sunspot 36HX landing and taxi lights can be installed with the pulse function enabled in a Cessna 185 under STC, or in other aircraft models with a 337 that uses the Cessna 185 STC as a basis for approval.
What are the installation requirement for the TSO Lights?
If the lights are mounted to an existing mounting location with no structural modifications, and existing wiring can be re-used, the lights can be installed with a log book entry.
If there are modifications to the wiring, a 337 should be submitted for approval for the installation.
If there are structural modifications made to mount the lights, a more extensive approval may be required, ranging from a 337 to an STC.
What are the recommended wire for the Pulsar and Suntail lights?
We recommend 3 conductor 20 gauge shielded single bundle wire, which we have available in our accessories area.

Share your knowledge of this product. Be the first to write a review »